Test
A small area is tested first to set pressure and nozzle for the material.
Patios, driveways, paths and steps across Louth cleaned at pressure matched to the material — coastal damp keeps paving green and slippery through the winter — with jointing sand replaced where the wash lifts it.
Along the Louth coast a patio deals with more than rain: windblown grit settles into the joints, salt keeps the surface damp, and the two together break down jointing sand and give algae somewhere to root. In the towns, Dundalk and Drogheda driveways pick up traffic film and oil on top of that, which needs pre-treating rather than just blasting.
We clean paving throughout the county — Dundalk, Drogheda, Ardee, Carlingford, Dunleer and Blackrock — with the pressure set to the material, not to whatever the machine happens to be set at.
Patio, driveway or both — quoted as a fixed price before booking. No hidden extras, no day-rate creep.
Hard paving is the one place where pressure genuinely is the right tool — the surface is dense, the soiling is ingrained, and the result is immediate. The judgement is in the pressure and the pattern. Too much pressure lifts jointing sand, pits soft sandstone and blows out the face of concrete slabs; uneven passes leave visible bands, which looks worse than not cleaning at all. Driveways soil unevenly too — oil in the parking bays, moss along the shaded edges, grime through the middle — so they get pre-treated before the main clean. Where a surface is too soft for pressure, we say so and softwash it instead.
A small area is tested first to set pressure and nozzle for the material.
Weeds and moss cleared from joints and edges, oil and tyre marks pre-treated.
Even overlapping passes across the whole surface, including steps, kerbs and thresholds.
Sand replaced where jointing has washed out, debris collected, drainage checked.
Not sure what you're looking at? Send a photograph with your enquiry and we'll tell you whether it wants pressure or a softwash.
Every job is photographed before and after — so you can see the actual difference the treatment made, not a marketing shot.
Not when the pressure is matched to the material. Soft sandstone, painted concrete and timber need lower pressure or softwashing — we assess and test before we start.
Most oil lifts substantially with pre-treatment. Deep, long-standing stains in porous concrete may remain faintly visible — we say so before quoting rather than after.
Yes. Where kiln-dried sand has washed out of block paving or slab joints we re-sand as part of the job so the surface stays locked together.
Yes, and it is the cheaper way to do it — one set-up, one visit, and two or more services take 5% off the total.
Usually a few hours in dry weather. Avoid parking on freshly re-sanded block paving until the following day.
Low-pressure softwashing that removes biofilm, mould and discolouration from render and painted walls.
See the service →Softwashing treatments that safely eliminate moss, algae and lichen from roof tiles and slate.
See the service →Blockages cleared to restore drainage and prevent water damage to fascia, walls and foundations below.
See the service →UPVC brought back to white.
See the service →Glass, frames, sills and doors cleaned and dried.
See the service →Send a photograph and a rough measurement. We'll come back with a fixed price. Booking more than one service? Take 5% off the total.