Test
A small area is tested first to set pressure and nozzle for the material.
Patios, driveways, paths and steps across Galway cleaned at pressure matched to the material — Atlantic damp turns slabs and block paving green and slippery within a season — with jointing sand replaced where the wash lifts it.
High rainfall and long overcast spells keep paving damp for weeks at a time, which is exactly what algae and moss need to colonise the joints and green the surface over. Add oil and tyre marks in the parking bays, salt residue on coastal driveways, and the shaded edges under boundary walls — and most Galway drives look ten years older than they are.
We pressure-wash patios, driveways, paths and steps across the county — Galway city, Salthill, Barna, Oranmore, Athenry, Loughrea, Tuam and Ballinasloe — matching pressure and nozzle to the paving so nothing gets etched, bleached or blown out on the way to a clean finish.
Patio, driveway or both — quoted as a fixed price before booking. No hidden extras, no day-rate creep.
Hard paving is the one place where pressure genuinely is the right tool — the surface is dense, the soiling is ingrained, and the result is immediate. The judgement is in the pressure and the pattern. Too much pressure lifts jointing sand, pits soft sandstone and blows out the face of concrete slabs; uneven passes leave visible bands, which looks worse than not cleaning at all. Where a surface is too soft for pressure, we say so and softwash it instead.
A small area is tested first to set pressure and nozzle for the material.
Weeds and moss cleared from joints and edges, oil and tyre marks pre-treated.
Even overlapping passes across the whole surface, including steps, kerbs and thresholds.
Sand replaced where jointing has washed out, debris collected, drainage checked.
Not sure what you're looking at? Send a photograph and we'll tell you whether it wants pressure or a softwash.
Every job is photographed before and after — so you can see the actual difference the treatment made, not a marketing shot.
Not when the pressure is matched to the material. Soft sandstone, painted concrete and timber need lower pressure or softwashing — we assess and test before we start.
Most oil lifts substantially with pre-treatment. Deep, long-standing stains in porous concrete may remain faintly visible — we say so before quoting rather than after.
Yes. Where kiln-dried sand has washed out of block paving or slab joints we re-sand as part of the job so the surface stays locked together.
Yes, and it's the cheaper way to do it — one set-up, one visit, and two or more services take 5% off the total.
Low-pressure softwashing that removes biofilm, mould and discolouration from render and painted walls.
See the service →Softwashing treatments that safely eliminate moss, algae and lichen from roof tiles and slate.
See the service →Blockages cleared to restore drainage and prevent water damage to fascia, walls and foundations below.
See the service →UPVC brought back to white.
See the service →Glass, frames, sills and doors cleaned and dried.
See the service →Send a photograph and a rough measurement. We'll come back with a fixed price. Booking more than one service? Take 5% off the total.