Render & Walls
Is It Damp or Is It Algae? Reading a Discoloured WallGrowth on the face of the render, or water in the wall itself? How the signs differ, where they overlap, and why a damp wall needs its cause...
Render & Walls
Key takeaways
Plenty of people only find out their render was hollow when a piece of it ends up on the patio. Somebody goes along the front of the house with a pressure washer to shift the green, the lance passes over an innocent-looking patch, and a slab the size of a dinner plate drops off the wall. The washer did not break that render. It found where it was already broken.
Render works because it is stuck to the wall. When part of it stops being stuck, it can stay in place, held up by its own edges and the sound render around it, with a thin gap behind. Tap it and it sounds different from the rest of the wall: a dull, drummy note instead of a solid one.
The Society for the Protection of Ancient Buildings describes these patches on old lime roughcast as “hollow-sounding and not fully keyed to their backing” (SPAB guidance on roughcast). The same page lists what tends to cause deterioration in the first place: defective weatherings such as copings, “dampness, notably at the foot of walls”, and exposure to the prevailing weather. It also points out that cement renders and old lime finishes are treated differently once they have gone hollow, which is a decision for whoever repairs it, not whoever cleans it.
The awkward thing is that you mostly cannot see it. A hollow patch may have a hairline crack round its edge, or it may have nothing at all.
A pressure washer cleans by hitting the surface with a narrow, hard jet of water. On render that is properly bonded, the wall behind takes that force. On a patch that has come away, nothing behind it is taking the load. The jet is pushing on a loose shell.
Whether that particular patch lets go on the day depends on how far gone it is. But the method has no way of telling a sound wall from a hollow one. It treats them the same, and only one of them survives that treatment.
Pressure has no way of knowing which patch of render is still holding on.
Softwashing takes the force out of the job altogether. Our Westmeath softwashing page sets out the aim in one line: lifting biofilm, green algae and black mould off render and painted walls “with no paint stripped and no hollow render blown off.” Its FAQ explains how: “There is no mechanical action on the surface — the cleaning is chemical, not pressure.”
That matters because the green on modern render is rarely dirt sitting on top. The same page describes it as “a living biofilm — algae, lichen, mould and fungi with roots running into the top few millimetres of the finish.” Pressure only takes off the visible layer. A biocide applied at low pressure, top down, in overlapping passes across the full elevation, kills the colony at the root, and it keeps working after we leave. Most elevations continue lightening for one to three weeks.
None of that needs anything to hit the wall hard. Softwashing does not repair a hollow patch, but it does not put force on it either.
Being honest about the limit matters here. Softwashing is a cleaning method, not a repair. If the render is hollow, it is still hollow after the wall has been treated, and the underlying cause, whether that is water getting in at a sill, a failed coping or damp at the foot of the wall, still needs a plasterer or builder to deal with it.
What changes is that the cleaning itself stops being a risk to it. Where render is known to be loose, the better order is usually repair first and clean after, since cleaning fixes nothing and the cause of the loss of bond is still at work. Where nobody knows how sound the render is, which is the usual position, a method with no mechanical action means the cleaning itself is not putting force on the wall.
Every softwash starts with a survey of the elevation and an identification of what is growing on it. K-Rend, monocouche, pebbledash and painted walls are identified first, because each behaves differently. Planting and openings are protected and glazing masked where needed. On paths, patios and other flat surfaces, pets and children are kept off for 24 hours after treatment, and planting is drenched before and after.
If somebody has already been at the wall with a washer and a piece has come away, the gap needs repairing by the right trade, and that is not a cleaning job. Once it is made good, the wall can be cleaned without force, so the cleaning does not find a second patch the hard way. Our Longford softwashing page puts the general principle simply: pressure is “kept low so the substrate is never damaged.”
Often you cannot tell by looking. Hollow patches sound dull or drummy when tapped, compared with the solid note of render that is still bonded, and some have a fine crack around the edge. A plasterer can tell you how much of the wall is affected.
Because that patch had almost certainly already come away from the wall behind it. A pressure washer hits the surface hard, and render with no bond behind it has nothing holding it in place except its own edges.
Not by itself. Softwashing has no mechanical action on the surface, so it does not test the render the way a jet does, and hollow patches are often invisible from the outside. SPAB describes them as “hollow-sounding”, which is how they tend to be found: by sound, not by sight.
A pressure washer is still a jet aimed at the surface, whatever the setting, and the operator often cannot see which patches are hollow. Softwashing avoids the question by taking the force out of the cleaning altogether.
Keep reading
Render & Walls
Is It Damp or Is It Algae? Reading a Discoloured WallGrowth on the face of the render, or water in the wall itself? How the signs differ, where they overlap, and why a damp wall needs its cause...
Render & Walls
Grey Render in Dublin: Traffic Film, Biofilm, or Both?Dublin render often goes grey rather than green: traffic soot and brake dust mixed into a living biofilm. Why the growth still has to be kil...
Render & Walls
What a Whole-House Wash Covers, and the Order It’s Done InWalls, roofline and glass on one visit, and why the order matters: the wall is softwashed before the windows, and the fascia is rinsed so it...
Not sure what your property needs?
If the growth on your roof or render is doing damage, we will say so. If it can wait, we will say that too.
Get a free quote